48 ports PoE switch Ethernet Switch Gigabit Network Switch SM-NS10480
Main Features:
10/100/1000M 48 ports +4 10G SFP ports
Supports static routing function
Management features, complete security policy
Comprehensive ACL access control policies, powerful QoS capabilities
VLAN Function
Flexible expansion capabilities
SM-NS10480 supports 10/100/1000M 48ports Adaptive RJ45 ports and 4 10G SFP fiber module expansion slot, the networking port type for the user to provide a great deal of flexibility to fully protect user investment.
Comprehensive network security access policies.
Supports Port / MAC / IP / VLAN ID four yuan automatic, intelligent binding, users can quickly locate information; built a variety of DoS attack detection, DoS attacks effectively enhance the security risks for the overall defense capability; supports security for each port, effective defense MAC address attacks, comprehensive protection for network security.
Multi-level, diversified access policies to control
ACL powerful hardware capabilities,supports L2 ~ L4 data stream classification,provid based on source MAC address,destination MAC,source IP address,destination IP address,IP protocol type, TCP / UDP ports defined ACL,And supports based on port, VLAN, ACL..
VLAN Feature
Supports IEEE 802.1Q VLAN,Protocol Based VLAN,Private VLANand VLAN VPN, Can be divided according to the different needs of different virtual networks.IEEE 802.1Q VLANCompatible with Port VLAN,Protocol Based VLAN agreement to divide VLAN,Private VLAN can isolate broadcast packets ,VLAN VPN expand the VLAN resources,Implement user VLAN transparent transmission for technology.
Main Features :
The 24 Port managed PoE Switch, with 24 100Mbit RJ45 ports,2 Gigabit SFP port and 2 Gigabit Uplink, model SM- PS3024S, reduces equipment and installation costs by delivering data and power over existing Ethernet cables (CAT5 cable)to Power over Ethernet (PoE) enabled devices such as Access Points and IP Cameras.Boost office efficiency and reduce network congestion with a totalswitching capacity of 8.8Gbps. LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and delivers 25.5 Watts to singlePoE port. A convenient on/off button is located on the back of the switch. Non-PoE devices can connect to the switch—auto-sensing PoE technology cuts power to non-PoE connected devices. Use PoE Splitter with the SM- PS3024S to install non-PoE devices in remote locations.
Product Introduction
Managed 24 port POE Switch for IP Camera/VOIP/Wireless AP
Key Features:
• 24-Port 10/100Mbps + 2 Gigabit SFP+2 Gigabit Uplink unmanaged PoE Switch
• 24 -Port supply power to PoE Powered Device
• Complies with the IEEE 802.3af/at standard
• If 12 POE port work only, then complies with IEEE 802.3at standard,25W each port
• Each switch port support auto-negotiation-10/20, 100/200Mbps (Fast Ethernet) , 1000/2000Mbps (Gigabit Ethernet).
• Support MAC address auto-learning and auto-aging
• Prevents packet loss with back pressure (Half-duplex) and IEEE 802.3x PAUSE frame flow control (Full-duplex)
• High performance Store and Forward architecture, broadcast storm control, runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth
•Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput
•8.8 Gbps Switching Capacity
•On/Off power switch
Web-Smart:192.168.2.1
The 16-Port unmanaged PoE Switch, with 16 100Mbit RJ45 ports,2 Gigabit SFP and 2 Gigabit Uplink, model PS1016, reduces equipment
and installation costs by delivering data and power over existing Ethernet cables to Power over Ethernet (PoE) enabled devices such as Access Points and IP Cameras.
Boost office efficiency and reduce network congestion with a total
switching capacity of 7.2Gbps. LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and delivers 15.4 Watts to each PoE port. A convenient on/off button is located on the back of the switch. Non-PoE devices can connect to the switch—auto-sensing PoE technology cuts power to non-PoE connected devices. Use PoE Splitter with the PS3016 to install non-PoE devices in remote locations.
Fast Ethernet 16 port with 2 combo SFP port poe switch
Key features
• 16-Port 10/100Mbps + 2 Gigabit SFP port+2 Gigabit Uplink unmanaged PoE Switch
• 16-Port support power to PoE Powered Device
• Complies with the IEEE 802.3af standard
• If 8 POE port work only, then complies with IEEE 802.3at standard,25.5W each port
• Each Switching port support auto-negotiation-10/20, 100/200Mbps (Fast Ethernet) , 1000/2000Mbps (Gigabit Ethernet) supported
• Support MAC address auto-learning and auto-aging
• Prevents packet loss with back pressure (Half-duplex) and IEEE 802.3x PAUSE frame flow control (Full-duplex)
• High performance Store and Forward architecture, broadcast storm control, runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth
•Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput
7.2 Gbps Switching Capacity
On/Off power switch
Fanless design to make sure it works quietly without disturbing your family
Main Features:
9 10/100Mbps Auto-Negotiation RJ45 ports with 8 POE port
100M Unmanaged 24 Ports PoE switch 2 uplink rj45 plug SFP 2 port switch fiber switch SM- PS3024
Main Features:
The 24 -Port unmanaged PoE Switch with 24 100Mbps RJ45 PoE ports,2 Gigabit combo, model PS3024, reduces equipment and installation costs by delivering data and power over existing Ethernet cables (CAT5 cable)to Power over Ethernet (PoE) enabled devices such as Access Points and IP Cameras.
Boost office efficiency and reduce network congestion with a total switching capacity of 8.8Gbps. LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and delivers 15.4 Watts to each PoE port. A convenient on/off button is located on the back of the switch. Non-PoE devices can connect to the switch—auto-sensing PoE technology cuts power to non-PoE connected devices. Use PoE Splitter with the PS3024 to install non-PoE devices in remote locations
24 10/100Mbps PoE port, 2 Gigabit combo port unmanaged PoE Switch
24 -Port supply power to PoE Powered Device
Complies with IEEE 802.3af standard
Each switch port support auto-negotiation-10/20, 100/200Mbps (Fast Ethernet) , 1000/2000Mbps (Gigabit Ethernet)
Prevents packet loss with back pressure (Half-duplex) and IEEE 802.3x PAUSE frame flow control (Full-duplex)
High performance Store and Forward architecture, runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth
Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput
8.8 Gbps Switching Capacity
On/Off power switch
▪Port:28 ports with 24 100Mbit PoE ports,2 Gigabit Copper/SFP Combo Uplink Port
▪Bandwidth: 8.8 Gbps; IEEE802.af/at standard
▪POE data & power transmission distance up to 100m
Built-in 400W adapter power
▪Dimension:440mm*290mm*44mm .
Main Features:
SM-PS5010 is 10 port 100Mbps with 8 PoE port ethernet switch, auto detection and identification IEEE802.3af/at standard PD device, then carry power to it. Therefore do not worry it will destroy the private standard PoE or Non-PoE equipment.
PS5010 is the best choice for minitype commercial network because it economically use PoE deployment wireless AP and IP camera .
It can resolve the problem of maintenance tedious, wireless coverage, terminal device powered, surveillance project. Maximum save the cost.
Support power over ethernet cable device for example wireless AP and IP camera
Support IEEE802.3af standard
Data and power transmission distance 100m, it can be flexible installation for wireless AP and surveillance project
Support upward port auto MDI/MDIX
Adopted storage forward switch system
Intelligentize power and minimum consumption,guarantee PD requirement.
With power supply circuit protection function and protection back-end device safety
Automatically provide the adaptive device
Adopted single fan radiating increase the device performance
PSE modular design
Support loop circuit detection
Support saving power function when port unconnection.
Main Features:
Model SM-PS1081G, the 8 port gigabit PoE switch with 48V/2A external power, provides an easier installation way for your PoE devices (IP cameras,VoIP,wireless AP,etc.).And it can detect your PoE devices according to PoE standard.So the users do not need to worry about the PoE switch will damage their PoE devices.The max transmission distance is 100 meters with Cat5 cables.Ideally,shorter cable would reduce the power degradation over the cables; with high quality cables also can reduce power loss.Plug & play design make the installation quite easy,users do not need any configuration,which make this PoE switch a very good choice for IP cameras,wireless AP,VoIP users.
8 10/100/1000Mbps Auto-Negotiation PoE ports with 1 gigabit uplink port
Complies with IEEE802.3af standards
Each port support auto-negotiation 10/100/1000Mbps
Bandwidth 18Gbps
Supports automatically detect function to protect the system when the system power is overloaded or there is non-POE device
LED indicators for monitoring power, link,activity and speed
48V /2A external power
Power pin :12(+) 36(-)
4 ports 100M Unmanaged 4 Ports PoE Ports 1 NON PoE UPlink POE Switch 5 Port for IP camera SM-PS504
Main Feature:
SM-PS504, 4+1 Port 100Mbps mini PoE Switch, reduces equipment and installation costs by delivering data and power over existing Ethernet cables. This unmanaged switch offers four 100Mbps PoE port which supply 15.4 watts of power per port for devices such as high power wireless access points, and VoIP telephony systems. Auto sensing technology delivers 15.4 watts to 802.3af PoE devices. It reduces energy consumption by up to 75% when the switch is not in use. Boost office efficiency and reduce network congestion with a total switching capacity of 1 Gbps. LED indicators display device status for efficient troubleshooting. This switch comes in a sturdy metal case.
IEEE 802.3af Power over Ethernet standard
Supports 10/100Mbps fast Ethernet
4 x 100Mbps Auto-MDIX PoE ports
Provides up to 15.4 watts for PoE
Automatically detects the PoE class level of a Powered Device
1Gbps bandwidth
Forwarding rate: 100 Mbps / 148,800 pps; 10 Mbps / 14,880 pps
Status LEDs: System Power, PoE, 100 Mbps, and Link / Activity
Full wire-speed non-blocking reception and transmission
Store-and-forward switching method
Back pressure Flow Control for Half-Duplex mode
IEEE 802.3x Flow Control for Full-Duplex mode
Power saving technology powers down unused ports and when a connected device is in standby mode
Plug and Play
Sturdy rack mountable metal case
Easy installation and use , no need to convert by software and network protocol
1-year limited warranty